post

Capping Battleground Timers

 

Battleground timers and other PvP features.

Configure by right-clicking the anchor or by typing /capping

Features
  • All battlegrounds/arenas have queue timers
  • Arenas – Shadow Sight timer, arena time remaining
  • Alterac Valley – Node timers, auto quest turnins
  • Arathi Basin – Node timers and final score estimation
  • Eye of the Storm – Flag respawn timer, final score estimation
  • Isle of Conquest – Node timers and siege engine timer
  • Warsong Gulch – Flag respawn timer
  • Wintergrasp – Wall attack alerts
  • Battle for Gilneas – Node timers and final score estimation
  • Deepwind Gorge – Node timers and final score estimation

Capping is open source and development is done on GitHub. You can contribute code, localization, and report issues there: https://github.com/BigWigsMods/Capping

636755702260653605.png
636141563890814550.jpg

 

post

ClassicCastbars

ClassicCastbars

Adds castbars to TargetFrame and nameplates in Classic World of Warcraft 1.13.x.
You may toggle which unitframes you want to see castbars for. See configuration below.

Imgur

Install

  • Install as any other addon, but make sure that the addon folder is called just “ClassicCastbars”, not “ClassicCastbars-master” or “ClassicCastbars-v1.0.0”.
  • You can also download from WoWInterface instead of Github here.

Configuration

You may configure this addon using chat commands:

  • /castbar target enable – Toggles castbar for Target Frame. You might need to retarget an unit for it to update.
  • /castbar nameplate enable – Toggles castbar for Nameplates.
  • /castbar target pos dynamic – Toggles automatic positioning for Target castbar. Default on.
  • /castbar target pos xValue yValue – Set X and Y offset position for Target castbar. Negative X value will move bar left, positive right. Y value is same thing but moves up and down. Using this will automatically disable dynamic positioning. Replace xValue and yValue with your values, for example: /castbar target pos 20 -40
  • /castbar nameplate pos xValue yValue – Same as above but for nameplate castbars.

Contribute

License

Copyright (C) 2019 Wardz | MIT License

post

HonorSpy

Install

Download zip of ‘master’ branch (just click Clone or Download -> Download ZIP), unzip the archive, remove ‘-master’ suffix from folder name and put it in Interface/Addons folder, relaunch WoW.

About

Addon does all the magic in background.

  1. It inspects every player in ‘inspect range’ which you target or mouseover
  2. It syncs your db with other party/raid/bg members and your guildmates on your death
  3. It can estimate your (or specific player) onward RP, Rank and Progress, taking into account your (player’s) standing and pool size.
  4. It can export your internal DB in CSV format to copy-paste it into Google Spreadsheets for future calculations. Spreadsheet done specially for HonorSpy, it will estimate RP for all players.
  5. It supports automatic weekly pvp reset. Reset day can be configured.
  6. You can see how old every player data is in your db by hovering it in table
  7. Supports sorting by RP and ThisWeekHonor
  8. Limit number of players shown to reduce lag on table open. Default limit is set to: 750.

Options can be invoked by right clicking on the minimap icon.

It only stores players with >15HKs. Reset day can be configured, default is Wednesday. Reset time is fixed at 10AM UTC.

P.S. Do not be afraid of losing all your data, very likely that another players with HonorSpy will push you their database very soon. The more players use and collects data -> the more up-to-date data you will have. Magic of sync.

Commands

/hs show -> show/hide standings table

/hs search player_name -> report specific player’s standing

/hs standby -> enable/disable addon (in case you disabled it from right-click menu this helps to re-enable it)

Screenshot

HonorSpy Screenshot

Arena Spy

ArenaSpy will automatically detect your arena opponents during warmup if they are from the same server and faction.

How does it work?
This mod will automatically check your friends list and guild list to detect if they are your arena opponents. Additionally, every player you encounter in arena gets added to a list and checked in future arenas. To manually add a player to this check list type:
/as add <name>
Note: It is recommended that you have at least 10 friend slots available to efficiently detect players from your list.

Arena Unit Frames

Unit frames for your arena opponents, plus more
Frames can display the following, each of which can be toggled on or off:

  • Debuffs and buffs
  • Unit target
  • Party target indicators
  • Cast bars
  • Target distance indicator
  • Trinket cooldown status indicator
  • Diminishing returns indicator


Additional functionality include an elaborate alert system, completely customizable button click functionality, and buff/debuff filters.

Alerts can display a message on screen in large letters and/or play a sound when specific events occur. Custom sound files can be placed in the addon’s Custom folder to play any sound of your choosing. Some alerts have a speech option which will play pre-recorded voices instead of a sound effect, which will state the unit class and CC spell cast rather than a blanket sound effect for every class/spell. Alerts can also be configured to ignore specified classes/spells so they trigger only when you wish them to.

Capping Battleground Timers

Battleground timers and other PvP features.

Features

  • All battlegrounds/arenas have start timers
  • Ashran – Event timers, battle timer, graveyard timer
  • Alterac Valley – Node timers, auto quest turnins, and sync
  • Arathi Basin – Node timers and final score estimation
  • Eye of the Storm – Flag respawn timer, flag carrier display, and final score estimation
  • Isle of Conquest – Node timers and siege engine timer
  • Warsong Gulch – Flag respawn timer and flag carrier display with health percent
  • Wintergrasp – Start timers, wall attack alerts, and auto show zone map
  • Zone Map – Change scale, narrow, and hide border
  • Other – Port expiration timers, queue wait timers, scoreboard/capture bar/vehicle seat repositioning

Capping Battleground Timers

attleground timers and other PvP features.

Features

  • All battlegrounds/arenas have start timers
  • Ashran – Event timers, battle timer, graveyard timer
  • Alterac Valley – Node timers, auto quest turnins, and sync
  • Arathi Basin – Node timers and final score estimation
  • Eye of the Storm – Flag respawn timer, flag carrier display, and final score estimation
  • Isle of Conquest – Node timers and siege engine timer
  • Warsong Gulch – Flag respawn timer and flag carrier display with health percent
  • Wintergrasp – Start timers, wall attack alerts, and auto show zone map
  • Zone Map – Change scale, narrow, and hide border
  • Other – Port expiration timers, queue wait timers, scoreboard/capture bar/vehicle seat repositioning

Doom Cooldown Pulse

Ever wanted to know when a certain ability will come off cooldown, but you’re too caught up in a fight to notice? Doom_CooldownPulse is designed to fix that problem! It flashes the icon of the ability in the middle of your screen whenever it becomes usable again.

Great! Now.. how do I set it up?
Doom_CooldownPulse requires no initial setup; just install and you’re good to go! However, the options frame (which is accessable by typing /dcp) allows very easy customization. You can change all of the following:

  • Icon size
  • Icon position (press the unlock button)
  • Fade in time
  • Fade out time
  • Max opacity (transparency)
  • Max opacity hold time
  • Animation scaling (how big/small it gets when it flashes)
  • Cooldowns to ignore
  • Overlay color for pet cooldown pulses


It is intended to be very easy to customize, and your changes take effect immediately. You can see how your settings will look by pressing the “Test” button, or reset them to the default settings by pressing the “Defaults” button.

Doom Cooldown Pulse

Ever wanted to know when a certain ability will come off cooldown, but you’re too caught up in a fight to notice? Doom_CooldownPulse is designed to fix that problem! It flashes the icon of the ability in the middle of your screen whenever it becomes usable again.

Great! Now.. how do I set it up?
Doom_CooldownPulse requires no initial setup; just install and you’re good to go! However, the options frame (which is accessable by typing /dcp) allows very easy customization. You can change all of the following:

  • Icon size
  • Icon position (press the unlock button)
  • Fade in time
  • Fade out time
  • Max opacity (transparency)
  • Max opacity hold time
  • Animation scaling (how big/small it gets when it flashes)
  • Cooldowns to ignore
  • Overlay color for pet cooldown pulses


It is intended to be very easy to customize, and your changes take effect immediately. You can see how your settings will look by pressing the “Test” button, or reset them to the default settings by pressing the “Defaults” button.

GladiatorlosSA

This is a special addon, it has no interface, but it can speak. It is SOUND ALERT addon leads you to become GLADIATOR, so having the name GladiatorlosSA.

This addon will alert spells using customized voice. For example, when you are in BG or arena, an enemy uses his pvp trinket, a voice of “Trinket” will come out. It can alert many spells(100+), each spell can be selected on or off. The voice sets made by TTS(text-to-speech) is Neospeech US English female Julie. The default voice changes by your locale.

Slash Command
Type /gsa or /gladiatorlossa to config. you can select voice set, enable area and which ability to alert

Special Features

  • Alert invisible abilities such as mage’s cold snap, rogue’s preparation, hunter’s readiness, and all interrupt spells.
  • In arena it can alert the class name when the enemy use pvp trinket.(default is off, and just alert “trinket”)
  • Alert big heal for all the four healers’ most powerful healing abilities(eg Divine Light, Healing Touch).
  • Alert drinking, resurrection, reviving pet and summon demons.
  • Be silent when the buff isn’t at or the spell isn’t used by your target or focus.(default is off)
  • Alert when friendly interrupt successfully.
  • Add your own sound file and alert easily.
  • Gender detection ( with proper Voice Pack set )

FAQ
Why I can’t hear any sound of the addon?

  • Make sure your sound effect is open and your sound volume isn’t very low.

 

  • Check if you have disabled your current area in the “enable area” options, check if you have disabled the spells you just want to hear.

I want to hear the addon voice only, with no other game sound, can I?

  • Yes, you can! Just turn down the volume of game sound -> sound effect, music and ambience, But NOT the master volume. Now the new beta version of GSA use the master sound channel.

How to change the addon volume with the game sound volume unchanged?

  • Addon volume is based on the game volume by default but can be set to other output : Master / SFX(discution) / Ambience or Music and then change the volume in the main Wow menu

 

  • The alternate way is to change the volume of sound files by yourself using for exemple a software called “Audacity”.

How to add my own voice file and alert?

  • Add your own file eg. myspell.mp3 (must be .mp3 or .ogg here) in the file folder /Interface/AddOnss/GladiatorlosSA/Voice_Custom.(by default, but you can also use any other one under your wow root)

 

  • Type /gsa to show the config, then select “Custom”, add and config your sound alerts here.
    • Note that : Instant spell don’t have a SPELL_CAST_START just a SPELL_CAST_SUCCESS

How to make my own voice set?

  • If you want a voice set other than English/Russian/French/Chinese/Korean, try to make your voice files with the same names as the files in the folder “Voice_enUS”, then copy and overwrite the original files. Select “English (female)” in game, then your own voice set works.

 

  • If your voice set is very good, and you want to share it with others, just email me and add your voice files as attachment or send me a PM.